The Custer Adjustable Emergency Light # HF18A-MB that you referenced is considered weatherproof which means that it will withstand the rain and inclement weather.
In order for something to be considered waterproof it has to be able to be submerged underwater for a certain amount of time and still work. view full answer...
I went out to our warehouse and measured a width of 3-3/4 inches and a height of 1-5/8 inches for the lens on the Alpha Twin Strobz Amber LED Flashers # ALP77234. There is not currently a red replacement lens available for this product.
We do however have a selection of red strobe emergency lights available such as the Adjustable Red LED Emergency Light # HF18R-MB that also includes a magnetic base. I have attached a short video demonstration on this unit along with a link that will take... view full answer...
The base of the Adjustable Red LED Emergency Light, Magnetic Base, item # HF18R-MB, is 4-1/8 inches round overall and the magnet is 4 inches round. These lights will adjust to 90 degrees (see video) so if you are mounting them on a vertical surface you can adjust the light to point rearward. view full answer...
According to my Roadmaster representative, their older # 5250 Falcon tow bar is indeed compatible with MX base plates.
To wire the tow vehicle and the CRV together, there are some different alternatives. A wiring kit like # RM-154 from Roadmaster would permanently tap into the vehicle's wiring. I've linked a video of the install for you. A bulb and socket kit like # RM-155 would permanently install an extra bulb into each taillight assembly. The installation is permanent, but allows the... view full answer...
Tow Ready states that the speed rating for the Tow Ready tow bar part # 63180 is 45 mph. If you go faster than that the inertia of the vehicle can compromise the tow bar in the event of an emergency stop or turn. Since most modern vehicles don't have a flat, metal front bumper like what this requires it's not an ideal solution for most applications. The Roadmaster Stowmaster part # RM-501 is somewhat similar and does not have the same speed rating. It will require you to install a Roadmaster... view full answer...
The connections on this Trailer Wiring Junction Box, part # 38656, are made on the inside of this junction box with ring terminals. The wires will travel through the rubber grommets to enter and exit the box.
This box is weather proof, but not water proof, and what that means is that it will keep rain out under normal circumstances, but if it were to be submerged the box would not be dry on the inside. My contact at Pollak said that you could probably apply a rubber sealant to the lid... view full answer...
Since your 2021 Toyota 4Runner has the factory tow package you will be able to use the Plug-and-Play Wiring Harness for Redarc Brake Controllers item # RED49FR. This plug in adapter will allow you to install the Redarc Tow-Pro Liberty item # RED24FR or Tow-Pro Elite item # RED44FR. The factory connector is located above and to the left of the emergency brake pedal as shown in the provided photo.
I have linked an installation and set up video below.
You may also be interested in the Mounting... view full answer...
Yes, the Du-Ha Truck Storage Box and Gun Case # DU60051 can hold two rifles with scopes, or two shotguns. It is legal in most states for this application. This tough polyethylene storage unit fits the 2008 Tundra double cab (trucks without the under-seat audio system subwoofer) and matches the vehicle interior. Mounting hardware is included.
Thanks to its adjustable cargo divider panels this unit can be configured for other contents apart from hunting gear. The panels allow you to choose... view full answer...
Great question.
You are correct that the tow hooks for a 10K Class IV hitch on your 2018 Ram 1500, like the Curt # 14374, are designed to hold the tongue of the trailer via the safety cables in a worst-case scenario. Since the trailer would be uncoupled in this kind of scenario the safety cables, and likewise the safety chain loops, need to be rated high enough to handle the weight of the trailer for an emergency stop.
Manufacturers don't rate the chain loops for weight since they are... view full answer...
The Blue Ox Base Plate Kit # BX2666 is a fit for a 2019 Ford Fusion Sport so you would instead need the Roadmaster Direct-Connect Base Plate Kit # RM-524458-5. This base plate is compatible with Hybrid and Energy models as well as models with Adaptive Cruise Control. It has removable arms to provide you with a clean factory look when not in use.
To flat tow you need will also need a compatible tow bar, tow bar wiring kit, braking system, and safety cables. If you haven't purchased these... view full answer...
Yes, you can definitely install the Curt Spectrum Trailer Brake Controller item # C51170 in your 2015 Fleetwood Providence 42P. The question is whether or not you can use the Curt Custom Plug and Play Adapter item # C51322 to have an easy installation or use the Curt Universal Wiring Adapter item # C51515 to hardwire it in.
Your Fleetwood Providence is built on a Ford F-53 chassis. If you have it, the brake controller port is located on the left hand side of one of the steering column... view full answer...
To install either the Redarc Tow Pro Elite item # RED44FR or the Tow Pro Liberty item # RED24FR brake controller in your 2022 Toyota 4Runner you will need the Plug-and-Play Wiring Harness for Redarc Brake Controllers item # RED49FR. This harness will have you up and running with no issues whatsoever.
This plug in adapter is custom fit and connects right above your emergency brake. I've linked a picture below to help you find the plug you need.
To complete your installation you can also... view full answer...
To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts:
Redarc Tow-Pro Liberty Brake Controller item # RED24FR
Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item # RED99FR
Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-002
You don't need a mounting bracket to mount the main control unit. It comes with slots in the sides for zip tying it some where convenient. It weighs... view full answer...
The online edition of the owner's manual for your 2016 Chevrolet Equinox does indicate on page 193 that the maximum trailer weight that can be towed is 1000-lbs if the trailer itself does not have brakes. The vehicle certainly can tow more weight than this, up to 3500-lbs for the V6 version towing a trailer WITH brakes, but the issue here is stopping power and control rather than the sheer muscle to pull the trailer.
The vehicle itself has a curb weight of about 3700- to 4000-lbs and a... view full answer...
The Tow Ready T-One Vehicle Wiring Harness, # 118551, for your 2012 Ford Escape is designed to draw as much power as needed to operate the trailer lights up to 15 amps or 7.5 amps for tail lights and 7.5 amps for stop and turn lights.
The powered converter allows you to tow trailers with more lighting and draws power directly from the vehicle battery when using the trailer lights. The amperage drawn by this converter depends on the amount and type of lights that you have on your trailer.... view full answer...
No, you shouldn't need a resistor like item # DI34ZR when installing the Optronics LED Backup Light for Trucks or Trailers item # BUL52CB. I say shouldn't because if you're installing these lights on a trailer your tow vehicle should supply plenty of power for them to function correctly. If you're installing these on a vehicle for additional lighting you will most likely need one on each light.
To install the Optronics LED Backup Light item # BUL52CB you will want to use the PVC Grommet... view full answer...
The light you are seeing on your Prodigy Brake Controller # 90185 will stay on for fifteen minutes after the controller sees its last activity. It only draws a few millivolts so you would not need to worry about your vehicle battery draining. If you let it sit for fifteen minutes you should see the light go away. The light should turn green once you connect your trailer connector from your vehicle to your trailer. view full answer...
The T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # 118264 is a great option for a wiring harness on your 2013 Chevy Equinox for use with your cargo carrier's light strip. I have added a link to a video install of this harness on a 2013 Equinox, as well as a link to the written instruction manual so you can see exactly how and where to install it. When not using it with your light strip/cargo carrier you will simply disconnect it and store it in the... view full answer...
Go To Results